Backstopper CA-5030
Premium Rear Parking Assist System with Back-up Camera and MonitorThe CA-5030 is a rear parking assist system with audible warning chime and back-up camera with a monitor. This will allow you to hear and see when and what is behind you and how far it is. When you shift the vehicle into reverse it will activate the system showing you on the monitor what the camera image is as well as the distance to the object in a numerical value as well as with bars at the bottom showing what side of the vehicle and how close. As if that wasn’t enough you will also get a warning chime that will get faster as you get closer to the object.
- Description
Description
The CA-5030 is a rear parking assist system with audible warning chime and back-up camera with a monitor. It offers (4) high frequency ultra-sonic impact warning sensors as well as a 170⁰ camera that will put an image on the included 3.5” monitor. The system also has an external audible warning chime with a volume control switch as well. Some vehicles are difficult to install all (4) sensors, this is no problem as this system will work fine with just (2) sensors. Each sensor comes with shims at different angles so that you can get the perfect angle to get the most out of the premium parking assist system. Each sensor has a range of 8 feet to be able to pick up most everything behind your vehicle. The camera is of a flush mount design that once it is installed the only thing visible is the lens. The monitor will show both the image from the camera as well as the distance from the rear of the vehicle to the object behind it in both a numerical value as well as a bar graph.
The system has a self-test feature that will automatically detect how many sensors are connected and adjust the width of the detection for each sensor as needed. The CA-5030 also offers the “Intelligent Detection” system that will allow this system to work on vehicles with spare tire racks, tow hitches or bike racks without causing false alerts. The (4) sensors are waterproof and can be painted to match the vehicle, just be sure that the paint is not metalized and is only in a light coat. Metalized or heavily painted sensors could cause false alerts. The system does come with the hole saws needed to properly install the sensors and camera onto your vehicle.